¡Oferta!

Los revestimientos antideslizantes utilizan carburo de silicio negro en polvo de SiC negro

Abrasive refined by causing a thermal reaction to silicon carbide raw materials, composed of quartz stone and petroleum coke in an electric resistance furnace. Because it provides a large grinding force, it can be used in a wide range of fields. Base treatment Blasting such as deburring Lapping of glass, crystal and ceramics Letter engraving on stone materials Grindstone raw materials Polishing paper raw materials

$2,300.00 $2,250.00 /MT

Los revestimientos antideslizantes utilizan polvo de SiC negro carburo de silicio negro El carburo de
      silicio existe en aproximadamente 250 formas cristalinas. El polimorfismo de SiC se caracteriza por una gran familia de estructuras cristalinas similares llamadas politipos. Son variaciones del mismo compuesto químico que son idénticas en dos dimensiones y difieren en la tercera. Por lo tanto, pueden verse como capas apiladas en una secuencia determinada.

      Alpha silicon carbide (α-SiC) is the most commonly encountered polymorph; it is formed at temperatures greater than 1700 °C and has a hexagonal crystal structure (similar to Wurtzite). The beta modification (β-SiC), with a zinc blende crystal structure (similar to diamond), is formed at temperatures below 1700 °C. Until recently, the beta form has had relatively few commercial uses, although there is now increasing interest in its use as a support for heterogeneous catalysts, owing to its higher surface area compared to the alpha form.

Specification of silicon carbide

Particle Size Particle Distribution (µm)
Maximum Particle Size Particle Size at d03 Particle Size at d50 Particle Size at d94
# 240 ≤ 127 ≤ 103 58.6 ± 3.0 ≥ 40.0
# 280 ≤ 112 ≤ 87.0 49.4 ± 3.0 ≥ 33.0
# 320 ≤ 98.0 ≤ 74.0 41.1 ± 2.5 ≥ 27.0
# 360 ≤ 86.0 ≤ 66.0 36.1 ± 2.0 ≥ 23.0
# 400 ≤ 75.0 ≤ 58.0 30.9 ± 2.0 ≥ 20.0
# 500 ≤ 63.0 ≤ 50.0 26.4 ± 2.0 ≥ 16.0
# 600 ≤ 53.0 ≤ 43.0 21.1 ± 1.5 ≥ 13.0
# 700 ≤ 45.0 ≤ 37.0 17.9 ± 1.3 ≥ 11.0
# 800 ≤ 38.0 ≤ 31.0 14.7 ± 1.0 ≥ 9.00
# 1000 ≤ 32.0 ≤ 27.0 11.9 ± 1.0 ≥ 7.00
# 1200 ≤ 27.0 ≤ 23.0 9.90 ± 0.80 ≥ 5.50
# 1500 ≤ 23.0 ≤ 20.0 8.40 ± 0.60 ≥ 4.50
# 2000 ≤ 19.0 ≤ 17.0 6.90 ± 0.60 ≥ 4.00
# 2500 ≤ 16.0 ≤ 14.0 5.60 ± 0.50 ≥ 3.00
# 3000 ≤ 13.0 ≤ 11.0 4.00 ± 0.50 ≥ 2.00
# 4000 ≤ 11.0 ≤ 8.00 3.00 ± 0.40 ≥ 1.30

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “Los revestimientos antideslizantes utilizan carburo de silicio negro en polvo de SiC negro”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

PDF-LOGO-100-.png

TDS not uploaded

PDF-LOGO-100-.png

MSDS not uploaded

Please enter correct URL of your document.

Ir arriba